Nortel 1110 Installation And Operation Manual page 609

Table 75
Fields in the TFTP configuration file
Field Name
DOWNLOAD_MODE
VERSION
FILENAME
PROTOCOL
SERVER_IP
SECURITY_MODE
• 0625Cxx.bin – firmware image file
Note: 0625Cxx.bin is the name of the firmware file by default, but the
location and the name of the firmware image file being downloaded is
specified in the i2007.cfg file and can be any name. The name of the
firmware image file can be specified in relative path name notation (for
example, /subfolder/name.ext or name.ext).
Table 75 describes the fields in the configuration file on the TFTP Server.
The download mode can be set to AUTO or FORCED. It is recommended
that you set DOWNLOAD_MODE to AUTO.
Field Value
AUTO
FORCED
0625Cxx
0625Cxx.bin
TFTP
xxx.xxx.xxx.xxx
0
Use Procedure 130 to upgrade the firmware for the IP Phone 2007.
Appendix H: TFTP Server
Descriptions
Recommended setting. The application looks at
the version and downloads the FW if it is a newer
version than what is on the phone.
The version of firmware is ignored. The firmware
is always downloaded.
The version string compared to what is on the
phone.
Image file name. Must match the file name of the
actual IP Phone FW file.
Download protocol. Must be TFTP.
IP Address of the TFTP server in decimal.
For future use.
IP Phones Description, Installation, and Operation
Page 609 of 630