Nortel 1110 Installation And Operation Manual page 296

Page 296 of 630
553-3001-368 Standard 26.00
Nortel IP Audio Conference Phone 2033
The IP Audio Conference Phone 2033 can support a primary (S1) and
secondary (S2) connect server. If you require IP Phones to register on
multiple nodes, see "Enhanced Redundancy for IP Line Nodes" in IP Line:
Description, Installation, and Operation (553-3001-365).
The IP Audio Conference Phone 2033 searches for the connect server.
When the connection is complete, proceed to Step 5.
5 Enter the following information:
Screen prompt
Password
Node
TN
Note: Select the Shift soft key labeled (>>) and press Clear to edit the
TN field. The IP Audio Conference Phone 2033 by default will place you
in the units field of the TN. You can not use backspace to move to the
loop, shelf or card fields.
The IP Audio Conference Phone 2033 registers with the TPS and, if
needed, begins the firmware download. This takes several minutes.
When the download is complete, the IP Audio Conference Phone 2033
resets.
Note: The Enhanced UNIStim Firmware Download feature for IP Phones
provides an improved method of delivering new firmware to IP Phones.
For further information on Enhanced UNIStim Firmware Download, see
IP Line: Description, Installation, and Operation (553-3001-365).
The current system date and time appear on the top line of the display
when the configuration is complete. Self-labeling keys also appear.
6 Check for dial tone and the correct DN above the display.
7 (Optional) Customize the soft keys as required. For more information, see
Software Input/Output: Administration (553-3001-311), and IP Audio
Conference Phone 2033 User Guide.
August 2007
Description
IP Phone Installer Password
You are not prompted to enter the IP Phone
Installer Password if it has not been
configured in your system.
The node ID.
The TN or VTN.
End of Procedure