Nortel 1110 Installation And Operation Manual page 403

–
–
The settings configured in the Lock Menu sub menu override the settings
received from the DHCP string.
For more information about 4. Lock Menu manual user settings, see
Appendix Appendix F:: "Configuring the Local Tools menu" on
page
Configuring Secure Local Menu through Full DHCP
Password protection is enabled during Full DHCP configuration if the
SECUREMENU parameter, or the PARTSECURE parameter are present at
the end of the S4 part of the Full DHCP string. If neither the SECUREMENU
parameter, nor the PARTSECURE parameter is present, password protection
is not enabled.
The SECUREMENU/PARTSECURE item is an optional parameter. If it is
present, then the full S4 string needs to be present, including the action and
retries. The S4 string will already be present if the XAS support has been
configured through the DHCP. If XAS is not configured, you can still enable
password protection by setting the S4 IP address to 0.0.0.0 and by setting the
other fields to 0.
With Full DHCP, the vendor-specific or site-specific options must be
configured depending on the customers DHCP server configuration.
For further information on configuring Full DHCP, see Data Networking for
Voice over IP (553-3001-160).
Accessing the Local Tools menu
Once the password is entered, the Local Tools menu remains active for 5
minutes. You can freely navigate, exit and reenter the Local Tools menu
4. DHCP Secure Menu
5. Lock Now
579.
IP Phones
Nortel IP Phone 1140E
IMPORTANT!
Description, Installation, and Operation
Page 403 of 630