Nortel 1110 Installation And Operation Manual page 332

Page 332 of 630
553-3001-368 Standard 26.00
Nortel IP Phone 1110
DHCP (0-No, 1-Yes)
VLANFILTER (0-No, 1-Yes)
PC Port? (1-ON, 0-OFF)
PC Port? Untag All? (1-ON, 0-
OFF)
Duplex? (0-Auto, 1-Full)
PSK SRTP? (0-No, 1-Yes)
GARP Ignore? (0-No, 1-Yes)
You are prompted to enter the TFTP Server IP address if you are using a
TFTP Server to download the current firmware.
For CS 1000 Release 4.5, accept the default value of 0.0.0.0. A TFTP
Server is not required for CS 1000 Release 4.5. With the Enhanced
UNIStim Firmware Download feature, firmware can be automatically
downloaded from the Call Server. For further information about the
Enhanced UNIStim Firmware Download feature, see IP Line: Description,
Installation, and Operation (553-3001-365).
For CS 1000 Release 4.0, a TFTP Server is required to upgrade the
firmware. Enter the TFTP Server IP address.
August 2007
If you select 1 (1 for Yes), the
VLAN ID is configured
automatically to a value received
from the DHCP server.
You are not prompted for DHCP if
VLAN is not set to Auto (2-Au), or if
DHCP is not enabled.
Default 0 (0 for No)
You are not prompted for
VLANFILTER if VLAN is not
enabled.
Default 1 (for ON)
Default 1 (for ON)
Default 0 (for Auto)
Default 0 (for No)
Default 0 (for No)