Nortel 1110 Installation And Operation Manual page 323

Figure 28
IP Phone 1110 connections
5 Install the handset. Connect the end of the handset cable with the short
straight section into the handset. Connect the end of the handset cable
with the long straight section to the jack marked with the symbol
a small bend in the cable, and then thread the handset cord through the
channels in the stand so that it exits behind the handset through the
handset cord channel. The handset cord channel in the stand is marked
with the symbol
Note: Although a headset cord channel appears on the base of the
IP Phone 1110, the IP Phone 1110 does not support a headset port.
Nortel IP Phone 1110
.
+
See Figure 28.
IP Phones Description, Installation, and Operation
Page 323 of 630
+
. Form