Nortel 1110 Installation And Operation Manual page 419

S2 IP—the secondary CS 1000 node IP address for the IP Phone 1140E
Note: The IP Phone 1140E can support a primary (S1) and secondary
(S1) connect server. If you require IP Phones to register on multiple
nodes, see IP Line: Description, Installation, and Operation (553-3001-
365).
20 Use the Right navigation key to scroll and highlight Port. Press the Enter
key to start the edit mode. Use the dialpad to fill in the information.
Port—same as S1 port
21 Use the Right navigation key to scroll and highlight S2 Action. Press the
Enter key to start the edit mode. Use the dialpad to fill in the information.
Choose one of the following:
• for TPS only, enter 1
• for TPS and Secure Media Controller, enter 6 or 1
For more information about Secure Media Controller, see Secure Media
Controller: Implementation Guide (553-3001-225).
22 Use the Right navigation key to scroll and highlight Retry. Press the
Enter key to start the edit mode. Use the dialpad to fill in the information.
Retry—same as S1
23 Use the Right navigation key to scroll and highlight S2 PK.
S2 PK—the Private key of the alternate Secure Media Controller to which
the IP Phone is connected
24 Press the Enter key to start the edit mode. Use the dialpad to fill in the
information. Set the S2 PK to 6 or 1.
25 Press the Enter key to start the edit mode. Use the dialpad to fill in the
information. You must enter a 16-digit hexadecimal number. The default
is ffffffffffffffff.
26 Use the Right navigation key to scroll and highlight VoiceVLAN combo
box. Press the Enter key. Press the Down navigation key to open the list
box.
Nortel IP Phone 1140E
IP Phones Description, Installation, and Operation
Page 419 of 630