Nortel 1110 Installation And Operation Manual page 322

Page 322 of 630
553-3001-368 Standard 26.00
Nortel IP Phone 1110
4 Connect the AC power adapter (optional). Leaving the AC adapter
unplugged from the power outlet, connect the adapter to the AC adapter
jack in the bottom of the phone. Form a small bend in the cable, and then
thread the adapter cord through the channels in the stand
If using local power, use your IP Phone 1110 with the approved Nortel
AC adapter (model # N0089601).
Note: The IP Phone 1110 supports both AC power and Power over LAN
options, including IEEE 802.3af Power Classification 2. To use Power
over Ethernet, where power is delivered over the CAT5 cable, the LAN
must support Power over Ethernet, and an AC adapter is not required. To
use local AC power, the optional AC adapter can be ordered separately.
Figure 28 on page 323
August 2007
WARNING
shows the IP Phone 1110 connections.
.