Nortel 1110 Installation And Operation Manual page 275

• Date and time information (if the IP Phone is in an idle state) or Call
Timer (if provisioned in the Telephone options menu)
• Set information
The information in the display area changes, according to the call processing
state and active features.
Soft key label display
The soft key label has a maximum of seven characters. Each soft key includes
the soft key label and an icon. When a soft key is in use, a triangle icon
displays at the beginning of the soft key label, and the label shifts one
character to the right. (If the label is six characters long, the last or rightmost
character is truncated.) If a soft key is enabled, the icon state changes to on.
It remains in the on state until the soft key is pressed again. This cancels the
enabled soft key and turns the icon off, returning the soft key label to its
original state.
Use the Shift (>>) key to navigate through the layers of functions. If there are
only three functions assigned to the soft keys, the Shift (>>) key does not
appear and all three functions are displayed.
Figure 21 shows the soft keys on the display area.
Nortel IP Audio Conference Phone 2033
IP Phones Description, Installation, and Operation
Page 275 of 630