Nortel 1110 Installation And Operation Manual page 99

7 Enter the following information
Screen prompt
Password
Node
TN
The IP Phone 2004 registers with the TPS and, if needed, begins the
firmware download. This takes several minutes. When registration is
complete, the IP Phone 2004 resets.
Note: The Enhanced UNIStim Firmware Download feature for IP Phones
provides an improved method of delivering new firmware to IP Phones.
For further information on Enhanced UNIStim Firmware Download, see
IP Line: Description, Installation, and Operation (553-3001-365).
The current Call Server date and time appear on the top line of the display
when the configuration is complete. Self-labeling keys also appear.
8 Check for dial tone and the correct DN above the display.
9 (Optional) Customize the feature keys as required. For more information,
see IP Phone 2004 User Guide.
Nortel IP Phone 2004
Description
IP Phone Installer Password
You are not prompted to enter the IP Phone
Installer Password if it has not been configured
in your Call Server.
The node ID.
The TN or VTN.
End of Procedure
IP Phones Description, Installation, and Operation
Page 99 of 630