Nortel 1110 Installation And Operation Manual page 375

11 Use the Right navigation key to scroll and highlight Gateway. Press the
Enter key to start the edit mode. Use the dialpad to fill in the information.
Gateway—the default gateway for the IP Phone 1120E on the LAN
segment to which it is connected
12 Use the Right navigation key to scroll and highlight S1 IP. Press the
Enter key to start the edit mode. Use the dialpad to fill in the information.
S1 IP—the primary CS 1000 node IP address for the IP Phone 1120E
13 Use the Right navigation key to scroll and highlight Port.
S1 Port—a fixed value of 4100
14 Use the Right navigation key to scroll and highlight S1 Action. Press the
Enter key to start the edit mode. Use the dialpad to fill in the information.
Choose one of the following:
• for TPS only, enter 1
• for TPS and Secure Media Controller, enter 6 or 1
For more information about Secure Media Controller, see Secure Media
Controller: Implementation Guide (553-3001-225).
15 Use the Right navigation key to scroll and highlight Retry. Press the
Enter key to start the edit mode. Use the dialpad to fill in the information.
Retry—the number of times the IP Phone 1120E attempts to connect to
the server
16 Use the Right navigation key to scroll and highlight S1 PK.
S1 PK—the Private key of the Secure Media Controller to which the IP
Phone is connected
17 Press the Enter key to start the edit mode. Use the dialpad to fill in the
information. Enter 6 or 1.
For more information about Secure Media Controller, see Secure Media
Controller: Implementation Guide (553-3001-225).
18 Press the Enter key to start the edit mode. Use the dialpad to fill in the
information. You must enter a 16-digit hexadecimal number. The default
is ffffffffffffffff.
19 Use the Right navigation key to scroll and highlight S2 IP. Press the
Enter key to start the edit mode. Use the dialpad to fill in the information.
Nortel IP Phone 1120E
IP Phones Description, Installation, and Operation
Page 375 of 630