Nortel 1110 Installation And Operation Manual page 604

Page 604 of 630
553-3001-368 Standard 26.00
Appendix G: Bluetooth wireless technology
Procedure 128
Unpairing a wireless headset
1 Double-press the Headset key to open the 3. Bluetooth Setup dialog
box.
2 Press the Right navigation key to select the Paired: item.
3 Choose one of the following:
• If your headset is displayed in the Paired combo box, proceed to
step 4.
• If more than one device is paired, and your headset is not already
displayed in the Paired combo box, do the following:
— Press the Right navigation key one or more times to highlight
the Paired: combo box. Press the Enter key to open edit mode.
— Press the Up/Down navigation keys to open the list. Press the
Up/Down navigations key to scroll in the list and highlight your
headset.
— Press the Enter key to select the headset and close the box.
Press the Enter key to exit edit mode.
4 Press the Right navigation key one or more times to highlight the UnPair
button (next to the UnPair Device item).
5 Press the Enter key.
Your Bluetooth wireless technology headset is unpaired and removed
from the Paired: item list.
6 Press the Exit soft key to exit to the main display.
Note: Your Bluetooth wireless technology headset is no longer paired
with your phone, and the wired headset can be used. To use the
Bluetooth wireless technology headset again, you must perform the
pairing and activation procedure.
August 2007
End of Procedure