Local Diagnostics For The Ip Phone 2007 - Nortel 1110 Installation And Operation Manual

Page 560 of 630

Local Diagnostics for the IP Phone 2007

553-3001-368 Standard 26.00
Appendix E: IP Phone diagnostic utilities
For information about diagnostic utilities for the IP Phone 2007, see "Local
Diagnostics for the IP Phone 2007" on page 560. For information about
diagnostic utilities for the IP Phone 1120E, and the IP Phone 1140E, see
"Local Diagnostics for the IP Phone 1120E, IP Phone 1140E, and IP Phone
1150E" on page 566.
To access the Local Diagnostics menu on the IP Phone 2007, tap the Tools
icon then tap the Local Diagnostics menu entry. The Local Diagnostics menu
displays the following items:
• Network Diagnostic Tools
• Ethernet Statistics
• IP Network Statistics
• IP Set&DHCP Information
You can press the Return soft key in any submenu item screen to return to
the Local Diagnostics submenu. Therefore, you can gather information and
run tests without exiting and reentering the Local Diagnostics menu.
Use Procedure 111 to access Network Diagnostic Tools.
Procedure 111
Using Network Diagnostic Tools
1 Tap the Tools icon.
2 Tap the Local Diagnostics menu entry.
3 Tap the Network Diagnostic Tools soft key.
The screen displays Ping, Tracert, and EXIT soft keys, presents a pull-
down list for IP addresses, and displays the Ping and Hop parameters.
4 Scroll down through the IP addresses and tap an address.
5 The number of repetitions of the Ping command are shown in the top bar
of the screen. The default is 4.
To change the number of repetitions, tap on the number and enter a new
value using the USB keyboard.
August 2007