Nortel 1110 Installation And Operation Manual page 61

Nortel networks communication server 1000 release 4.5
Hide thumbs Also See for 1110:
Table of Contents

Advertisement

Note: You are prompted to enter the TFTP Server IP address if you are
using a TFTP Server to download the current firmware. For CS 1000
Release 4.5, accept the default value of 0.0.0.0. For Succession Release
3.0 or CS 1000 Release 4.0, enter the TFTP Server IP address. The
IP Phone searches for the TFTP Server for firmware upgrade. If the file
name specified in configuration file is not the same as the current
firmware, the IP Phone downloads the file and upgrades the firmware.
This takes several minutes. When the upgrade is complete, the IP Phone
reboots. For further information about TFTP Server configuration, see
Appendix Appendix H:: "TFTP Server" on
The IP Phone 2001 can support primary (S1) and secondary (S2) connect
server. If you require IP Phones to register on multiple nodes, see
"Enhanced Redundancy for IP Line Nodes" in IP Line: Description,
Installation, and Operation (553-3001-365).
The IP Phone 2001 saves the configuration and then reboots. The IP
Phone 2001 searches for the connect server. When the connection is
complete, proceed with step 6.
6
Enter the following information:
Screen prompt
Password
Node
TN
The IP Phone 2001 registers with the Terminal Proxy Server (TPS) and,
if needed, begins the firmware download. This takes several minutes.
When the download is complete, the IP Phone 2001 resets.
Note: The Enhanced UNIStim Firmware Download feature for IP Phones
provides an improved method of delivering new firmware to IP Phones.
For further information on Enhanced UNIStim Firmware Download, see
IP Line: Description, Installation, and Operation (553-3001-365).
The current system date and time appear on the top line of the display
when the configuration is complete. Self-labeling keys also appear.
7
Check for dial tone and the correct DN above the display.
Nortel IP Phone 2001
Description
IP Phone Installer Password
You are not prompted to enter the IP Phone
Installer Password if it has not been configured
in your system.
The node ID.
The TN or VTN.
IP Phones
Description, Installation, and Operation
Page 61 of 630
page
605.

Advertisement

Table of Contents
loading

Table of Contents