Nortel 1110 Installation And Operation Manual page 532

Page 532 of 630
553-3001-368 Standard 26.00
Appendix E: IP Phone diagnostic utilities
Procedure 92
Accessing IP Set & DHCP Information
1 Select IP Set & DHCP Information from the Network Diagnostic Tools
menu. The IP Set and DHCP information appears on the display.
2 Use the Navigation keys to browse the data. See Figure 57 on
Note: In Local Mode, Exit is the only soft-key available in this submenu.
Remote Mode
When the IP Phone is registered to the signaling server, diagnostics are
available through the Telephone Options menu in Remote Mode. This menu
is controlled by the TPS.
Note 1: Diagnostics are available on the IP Audio Conference Phone
2033 in Remote Mode only.
Note 2: When the user selects Diagnostics from the Telephone Options
menu, if an IP Phone Installer Password is enabled in the Signaling
Server, the Diagnostics menu is locked and the message "Access
denied" displays on the IP Phone display.
Use Procedure 93 to access the Diagnostics submenu in Remote Mode:
Procedure 93
Accessing the Diagnostics submenu
in Remote Mode
1 Press the Services key.
2 Select Telephone Options.
3 Select Diagnostics.
4 Do one of the following:
• Press the Cancel soft key to quit the Diagnostics submenu and
return to the Telephone Options menu.
• Use the Navigation keys to scroll through the Diagnostics
submenu.
• Press Select to select one of the diagnostics.
August 2007
End of Procedure
page 545.