Set Info - Nortel 1110 Installation And Operation Manual

Table 60
Display diagnostic operation on the IP Phone and the Expansion Module
Diagnostic step
initial screen
Full Contrast
LED Test
Character Test

Set Info

Expansion Module for IP Phone 1100 series
DN/feature key display areas. The telephone on-hook icon is displayed for all
DN/feature keys.
Table 60 shows the display diagnostic operation on the IP Phones and the
Expansion Module for IP Phones 1100 Series.
IP Phone DN/feature key
display area
blank
set to highest contrast
blank
Characters display across the
display areas, the telephone
on-hook icon is displayed.
The Set Info menu displays the firmware version for the IP Phone and any
attached Expansion Modules. The attached Expansion Modules are identified
as KEM1, KEM2, and KEM3. KEM1 is the closest to the IP Phone. The
Expansion Module identifies the firmware as a three character string; the TPS
displays the firmware in an n.nn format.
Use the Up/Down navigation keys to scroll the list to display the firmware for
each attached Expansion Module. The firmware version is displayed even if
the Expansion Module is not configured in LD 11. In this case, the Expansion
Module is identified in the display area by an asterisk (*) after the Expansion
Module number (for example, KEM1*).
If an Expansion Module is configured but does not respond, the firmware
version displays as <unknown>.
IP Phones Description, Installation, and Operation
Page 491 of 630
Expansion Module display
area
blank
set to highest contrast
blank
Characters display across
the display areas, the
telephone on-hook icon is
displayed.