Replacing An Ip Phone 1140E; Removing An Ip Phone 1140E From Service - Nortel 1110 Installation And Operation Manual

Page 428 of 630

Replacing an IP Phone 1140E

Removing an IP Phone 1140E from service

553-3001-368 Standard 26.00
Nortel IP Phone 1140E
Two IP Phones cannot share the same TN. You must remove the
IP Phone 1140E that is currently using the TN.
Procedure 77
Replacing an IP Phone 1140E
1 Obtain the node and TN information of the phone you want to replace.
2 Disconnect the IP Phone 1140E that you want to replace.
3 Follow Procedure 72 on
IP Phone 1140E.
4 Enter the same TN and Node Number as the IP Phone 1140E you
replaced. The Call Server associates the new IP Phone 1140E with the
existing TN.
Procedure 78
Removing an IP Phone 1140E from service
1 Disconnect the IP Phone 1140E from the network or turn the power off.
Note: The service to the PC is disconnected as well if the PC is
connected to the IP Phone 1140E.
If the IP Phone 1140E was automatically configured, the DHCP lease
expires and the IP address returns to the available pool.
2 In LD 11, enter OUT at the TN prompt.
August 2007
IMPORTANT!
page 408 to install and configure the
End of Procedure
End of Procedure