Nortel 1110 Installation And Operation Manual page 530

Page 530 of 630
553-3001-368 Standard 26.00
Appendix E: IP Phone diagnostic utilities
Use Procedure 87 on
Local mode.
Procedure 87
Accessing the Network Diagnostic Tools
menu in Local mode
1 Double-press the Services key. The Local Main Menu, Network
Diagnostic Tools, appears.
2 Press Cancel to quit, or use the Navigation keys to scroll through the
menu and select one of the following:
• Ping
• TraceRoute
• Ethernet Statistics
• IP Network Statistics
• IP Set & DHCP Information
Procedure 88
Executing Ping
1 Select Ping from the Network Diagnostic Tools submenu.
2 Press the IP soft key and enter the IP address to Ping.
Tip: Use the dialpad to enter the IP address. The * key is used for dots
and the # key produces a space.
3 Press the Ping soft key. The results of the Ping appear on the display.
4 Use the Navigation keys to browse the data. See Figure 53 on
Tip: Press the Ping soft key again to stop the pinging.
5 Press one of the following soft keys:
• Reset — to clear the data
• Exit — to return to the Network Diagnostic Tools menu.
August 2007
page 530 to access the Network Diagnostic Tools in
End of Procedure
End of Procedure
page 541.