Nortel 1110 Installation And Operation Manual page 538

Page 538 of 630
553-3001-368 Standard 26.00
Appendix E: IP Phone diagnostic utilities
4 Do one of the following:
• Press the OK soft key to return to the EtherStats submenu.
• Use the Navigation keys to browse the data.
5 Press the Cancel softkey to return to the EtherStats submenu.
Procedure 105
Checking 802.1x Supplicant Authentication state
1 Select EtherStats from the Diagnostics submenu.
2 Scroll through the EtherStats menu and select Authentication State.
3 Press the Select soft key.
4 Do one of the following:
5 Press the OK soft key to return to the EtherStats submenu.
• Use the Navigation keys to browse the data.
6 Press the Cancel softkey to return to the EtherStats submenu.
Procedure 106
Checking Device ID
1 Select EtherStats from the Diagnostics submenu.
1 Scroll through the EtherStats menu and select Device ID.
2 Press the Select soft key.
1 Do one of the following:
• Press the OK soft key to return to the EtherStats submenu.
• Use the Navigation keys to browse the data.
2 Press the Cancel soft key to return to the EtherStats submenu.
August 2007
End of Procedure
End of Procedure
End of Procedure