Supported features
The IP Phone 1110 supports the following telephony features:
•
four context-sensitive soft keys
Note: Functions for the context-sensitive soft keys are configured in
LD 11.
•
volume control keys for adjusting ringer, listen-only speaker, and
handset volume
•
two specialized feature keys:
— Message/Inbox
— Services
•
four call-processing fixed keys:
— Line key
— Goodbye
— Expand–reserved for future feature development
— Hold
•
Call Duration Timer
•
Virtual Office
•
Branch Office
•
Active Call Failover
•
Enhanced UNIStim Firmware Download
The IP Phone 1110 supports the following data network features:
•
integrated 10/100BT Ethernet switch for shared PC access
— the LAN Ethernet port supports 10/100BT Mbps Full Duplex mode
— the PC Ethernet port supports 10/100BT Mbps Full Duplex mode
•
automatic network configuration through DHCP
For more information about automatic network configuration, see
Table 38, "IP Phone 1110 IP parameters," on page 326.
Nortel IP Phone 1110
IP Phones
Description, Installation, and Operation
Page 309 of 630