Nortel 1110 Installation And Operation Manual page 583

Appendix F: Configuring the Local Tools menu
Network Configuration
Use the Network Configuration menu item to configure the IP Phone 1120E
IP Phone 1140E, and the IP Phone 1150E, and to display information which
was configured during installation. You can access the Network
Configuration menu using one of the following methods:
• Reboot the IP Phone and press the four soft keys at the bottom of the
display in sequence from left to right.
• Select 3. Network Configuration from the Local Tools menu.
Note: When attempting to access Network Configuration by double
pressing the Services key, or if the soft keys 1, 2, 3, and 4 are pressed
during bootup, the Admin Password window will prompt for the Admin
Password to be entered. Enter the "26567*738 (color*set) password,
then press the center of Nav key.
For information about Network Configuration, see the following procedures:
• Procedure 66 on
• Procedure 73 on
• Procedure 80 on
Lock Menu
You must enter the fixed password whenever the Lock Menu sub menu is
accessed. Use the dialpad and enter the fixed password 26567*738
(color*set).
Note: The settings configured in the Lock Menu sub menu override the
settings received from the DHCP string.
The Lock Menu offers the following choices:
• 1. Manual Secure Lock Menu
• 2. Manual Partial Secure Menu
• 3. Manual Disable Secure Menu
• 4. DHCP Secure Menu
• 5. LockNow
page 373—IP Phone 1120E
page 416—IP Phone 1140E
page 463—IP Phone 1150E
IP Phones Description, Installation, and Operation
Page 583 of 630