Nortel 1110 Installation And Operation Manual page 299

Nortel IP Audio Conference Phone 2033
who moved to a new subnet by changing the TN of the IP Audio Conference
Phone 2033.
Procedure 53
Changing the TN of an existing
IP Audio Conference Phone 2033
1 Repower the IP Audio Conference Phone 2033.
Note: During the reboot sequence of a previously configured the
IP Audio Conference Phone 2033 displays the existing node number for
approximately five seconds.
2 If the node password is enabled and NULL, choose one of the following:
a. Disable the password.
b. Set the password as non-NULL.
3 Press OK when the node number displays.
If
the node password is enabled and
is not NULL
the node password is disabled
4 Enter the password at the password screen, and press OK.
A TN screen displays.
To obtain the password, enter the nodePwdShow command in Element
Manager. For further information, see Communication Server 1000
Element Manager: System Administration (553-3001-332).
5 Select the Shift soft key labeled (>>) and press Clear to edit the TN field.
The IP Audio Conference Phone 2033 by default will place you in the units
field of the TN. You cannot use backspace to move to the loop, shelf or
card fields.
6 Enter the new TN.
Then
a password screen displays. Go to
step 4.
a TN screen displays. Go to
step 5.
End of Procedure
IP Phones Description, Installation, and Operation
Page 299 of 630