Use Your Directory; Enter Text Using The Dialpad; Use The Symbol Key To Enter Special Characters - Nortel IP Phone 2001 User Manual

Use your directory

Use your directory

Enter text using the dialpad

You can use the dialpad to enter text when you use features.
For example, if you want to use the letter "A", press the number 2 key
once. If you want the letter "C", press the number 2 key three times.
No letters are associated with the number 1 or the 0 keys.
Use the Directory feature to create and store up to 16 directory entries
consisting of names and numbers.

Use the Symbol key to enter special characters

When entering text into a directory name, surname etc. you will see a
"flashing cursor" on the information line above the bottom soft keys.
At this point you can press one of the keys on the dialpad. The following
list shows what each keypad press will display:
For example, if you press Key 2, the letter "A" will replace the flashing
cursor for approximately four seconds. The Symbol key will appear as
the third soft key from the left.
74
Key 1 - Nothing
Key 2 - AÀÁÂÃÄÅÆBCÇaàáâãäåæbcç2
Key 3 - DEÈÉÊËFdeèéêëf3
Key 4 - GHIÌÍÎÏghiìíîï4
Key 5 - JKLjkl5
Key 6 - MNÑOÒÓÔÕÖØmnñoòóôõöø6
Key 7 - PQRSpqrs7
Key 8 - TUÙÚÛÜVtuùúûüv8
Key 9 - WXYÝÞßZwxyýþÿz9
Key # - !"#$%&'()*+,-./0123456