Nortel 1110 Installation And Operation Manual page 260

Page 260 of 630
553-3001-368 Standard 26.00
Nortel Mobile Voice Client 2050
Macros
The Mobile Voice Client (MVC) 2050 Macros tab enables you to record and
use macros. A macro is a recorded sequence of steps that saves you
keystrokes.
For example, you can create macros that select a particular line and then dials
the telephone number automatically, or program voicemail access numbers
and codes for faster access.
Macro screen
To enter a new macro name, or to select an existing macro to modify or delete,
select the New icon to the right of the list box.
To select an existing macro, tap the down arrow in the Macro list box and
make your selection.
To delete a selected macro, tap the Delete icon (the button to the right of the
list box).
Keys
Once you have selected a macro name, tap the down arrow in the Keys
drop-down list to select a key to add to the macro. Press the Add button to add
the key.
Use the Pause key to insert a short pause in the macro. A pause introduces a
delay which may be required to access some Interactive Voice Response
(IVR) applications and the voicemail systems.
Contents
A list of the macro contents appears in the Contents list box. Once there are
two or more entries in this box, use the up and down buttons, which appear
on the right of the box to move around the keystrokes.
To remove keystrokes from the Contents box, select the keystroke and press
the Remove button.
August 2007