Nortel 1110 Installation And Operation Manual page 285

Nortel IP Audio Conference Phone 2033
Procedure 49
Installing the IP Audio Conference Phone 2033
for the first time using manual configuration
Timing information
When you see the text Nortel, you have 1 s to respond by pressing the
three soft keys at the bottom of the display in sequence from left to right,
one at a time. If you miss the 1-s response time, the IP Audio
Conference Phone 2033 attempts to locate the connect server. You can
begin the power-up sequence again, or you can double-press the
Services key to open the network diagnostic utilities to access the IP
Phone settings. See Appendix Appendix E:: "IP Phone diagnostic
utilities" on page 525.
You will hear a tone shortly before the IP Phone is ready to start the Nortel
IP Phone application. Once the application has loaded and started, you
will see the Nortel logo and Starting DHCP will appear at the bottom of the
screen.
To edit network configuration the following soft keys are available:
• OK—accept current settings and proceed to the next configuration
option. If all configuration options are presented, the configuration is
saved and the IP Phone reboots with the saved changes.
• BkSpace—backspace a configuration entry to change it
• Clear—clear an entire configuration entry
• Cancel—cancels out of network configuration. The IP Phone reboots
without saving changes.
1 To enter the configuration menu, press the three soft keys at the bottom
of the display in sequence from left to right.
2 At the prompt, DHCP Yes/NO?, enter 0 (0 for No).
IMPORTANT!
IP Phones Description, Installation, and Operation
Page 285 of 630