Removing An Ip Softphone 2050 From Service - Nortel 1110 Installation And Operation Manual

Page 234 of 630

Removing an IP Softphone 2050 from service

553-3001-368 Standard 26.00
Nortel IP Softphone 2050
If the node password is not configured, or is configured but disabled, go
to Step 3.
If the node password is configured and enabled for the node, go to Step 4.
3 During startup, the IP Softphone 2050 registers again with the TPS, and
the IP Softphone 2050 displays the existing node number and TN for
approximately five seconds.
4 If the password is configured and enabled for the node, the node number
and password prompt displays for approximately 5 seconds; enter the
correct password within this 5-second period.
If the user activates the Clear soft key during the 5-second period, the
existing node and TN are cleared and the user is prompted for new
parameters.
Procedure 42
Removing an IP Softphone 2050 from service
1 Exit the IP Softphone 2050 application.
2 Uninstall the IP Softphone 2050 application from the PC using the
Windows Add/Remove Programs.
3 In LD 11, enter OUT for the TN prompt.
August 2007
End of Procedure
End of Procedure