Nortel 1110 Installation And Operation Manual page 423

Nortel networks communication server 1000 release 4.5
Hide thumbs Also See for 1110:
Table of Contents

Advertisement

Use the Right navigation key to scroll and highlight TFTP IP combo box.
The IP Phone 1140E supports remote firmware upgrades through a TFTP
process and an automated UFTP process.
The method to upgrade the firmware depends on the following Call Server
software:
For Succession Release 3.0 or CS 1000 Release 4.0, the TFTP
Server is required to download the current firmware. Enter the TFTP
Server IP address at the prompt.
For CS 1000 Release 4.5 and later, use either a TFTP Server to
upgrade the firmware (at the prompt accept the default entry of
0.0.0.0), or UFTP to download the current firmware.
For further information about TFTP Server configuration, see
Appendix Appendix H:: "TFTP Server" on
For Succession Release 3.0 and CS 1000 Release 4.0, the IP Phone
1140E searches for the TFTP Server for firmware upgrade. If the file
name specified in 1140e.cfg is not the same as the current firmware, the
IP Phone downloads the file and upgrades the firmware. This takes
several minutes. When the upgrade is complete, the IP Phone 1140E
reboots.
Note: The Enhanced UNIStim firmware download is only supported on
CS 1000 Release 4.5 or later.The Enhanced UNIStim firmware download
feature for IP Phones provides an improved method of delivering new
firmware to IP Phones. For further information on Enhanced UNIStim
Firmware Download, see IP Line: Description, Installation, and Operation
(553-3001-365).
The IP Phone 1140E searches for the connect server.
The IP Phone 1140E registers with the Terminal Proxy Server (TPS) and,
if needed, begins the firmware download. This takes several minutes.
When download is complete, the IP Phone 1140E resets.
The current Call Server date and time appear on the top line of the display
when the configuration is complete. Self-labeling keys also appear.
44 Check for dial tone and the correct DN on the display.
45 (Optional) Customize the feature keys as required. For more information,
see For more information, see Software Input/Output: Administration
(553-3001-311) and the IP Phone 1140E User Guide.
Nortel IP Phone 1140E
End of Procedure
IP Phones
Description, Installation, and Operation
Page 423 of 630
page
605.

Advertisement

Table of Contents
loading

Table of Contents