Nortel 1110 Installation And Operation Manual page 600
Nortel networks communication server 1000 release 4.5
Hide thumbs
Also See for 1110:
- Fundamentals (572 pages) ,
- User manual (120 pages) ,
- Reference manual (6 pages)
Table of Contents
Advertisement
Page 600 of 630
553-3001-368
Standard 26.00
Appendix G: Bluetooth wireless technology
If pairing is still unsuccessful, pair the phone to another wireless
headset, or contact the headset vendor.
6
When the name of your headset appears in the Found: box, press the
Stop soft key or wait for the search to finish. When the search is complete,
the message Search Completed Found Device(s) appears.
7
Choose one of the following:
•
If your headset is displayed as the first item in the Found combo box,
proceed to step 8.
•
If your headset is not displayed as the first item in the Found combo
box, select your headset from the list, as follows:
a.
Press the Right navigation key one or more times to highlight the
Found: combo box. Press the Enter key to start the edit mode.
b.
Press the Down navigation key to open the list. Press the Up/Down
navigation keys to scroll and highlight your headset.
c.
Press the Enter key to select the headset and close the list. Press
the Enter key to exit edit mode.
8
Press the Right navigation key one or more times to highlight the Pair
button (next to the Pair Device item) and press the Enter key.
a.
A dialog box appears, with the prompt Enter PIN#.
b.
Use the telephone dialpad to enter the Bluetooth wireless technology
headset PIN and press the Enter key.
Check your headset's documentation to find its PIN (sometimes called a
passkey). Typically this value is 0000.
9
Choose one of the following:
•
If the headset is successfully paired with your phone, proceed to
step 10. To verify that the pairing was successful, ensure that the
headset appears in the list next to the Paired: item. If pairing is
successful, the message Pair completed also appears at the bottom
of the screen.
•
If the headset is not successfully paired with your phone, an error
message appears at the bottom of the screen. If an error message
appears:
— Confirm that the wireless headset is still in search/pair mode.
For example, on the GN Netcom GN 6210 headset the blue LED
should still be lighted when the pairing operation starts.
August 2007
Advertisement
Chapters
Table of Contents
