Nortel 1110 Installation And Operation Manual page 298

Page 298 of 630
Extensible Authentication Protocol
Reinstalling an IP Audio Conference Phone 2033
553-3001-368 Standard 26.00
Nortel IP Audio Conference Phone 2033
7 Restart the IP Phone. The firmware settings are read and are applied to
UPLINK and the PC Ethernet Port.
When the IP Phone is restarted, the firmware reads the setting for Full Duplex
mode and sets the LAN Ethernet port, PC Ethernet port, duplex, and speed
accordingly.
Use Procedure 52 to confirm activation of Full Duplex mode.
Procedure 52
Checking Ethernet Statistics
1 Click the Services key. The Network Diagnostics menu appears.
2 Select Telephone Op > Diagnostics > Ether Stats.
• If Full Duplex mode is active, the following is displayed:
— Duplex: Full
— Speed: 10 (Mb) or 100(Mb)
— Auto-Negotiate Capability: N
— Auto-Negotiate Completed: N
Extensible Authentication Protocol (EAP) is a general protocol that fulfills
the protocol requirements defined by 802.1x. For further information on
802.1x, see Appendix Appendix C:: "802.1x Port-based network access
control" on page 521.
You can reinstall an existing previously configured IP Audio Conference
Phone 2033 on the same system. For example, the IP Audio Conference
Phone 2033 can be assigned to a new user (new TN) or to an existing user
August 2007
End of Procedure
End of Procedure