Nortel 1110 Installation And Operation Manual page 550

Page 550 of 630
553-3001-368 Standard 26.00
Appendix E: IP Phone diagnostic utilities
Ethernet Statistics
Figure 62 illustrates the data displayed from the EtherStats submenu item.
Figure 62
Ethernet statistics data display screen
1.Link: UP/Down
2.Duplex:Full/Half
3.Speed: xxx (MB)
4.Auto Sense/Negotiate
Auto-Nego Capability: Y/N
Auto-Nego Completed: Y/N
5.VLANPriority:xxx
6.VLANID:xxxx
7.PktColl:xxxxxxxxxx
8.CRCErrors:xxxxxxxxxx
9.FrameErrors:xxxxxxxxxx
In Figure 62,
• Duplex - duplex mode
• Speed - network speed 10MB/100MB
• Auto Sense/Negotiate = Auto Negotiate Protocol Received or Not (Y -
Yes, N - No)
• VLANPriority = IP Phone VLAN priority
• VLANID = IP Phone VLAN ID
• PCollision = network packet collision peg counts
• CRCErrors = network CRC errors peg counts
• FrameErrors = network Framing errors peg counts
Note: In the IP Phone Configuration menu, Auto Negotiate mode is
the default setting for initial startup. If the telephone is connected to a
network that supports Auto Negotiate, it selects the best speed and
duplex mode available. For more information, see the applicable
IP Phone section.
August 2007