Nortel 1110 Installation And Operation Manual page 597

Table 73
1140e.cfg field name definitions (Part 2 of 2)
Field name
SERVER_IP
SECURITY_MODE
Appendix G: Bluetooth wireless technology
Field value
xxx.xxx.xxx.xxx
0
Possible reasons Bluetooth wireless technology remains
disabled on the IP Phone after bootup
The following are possible reasons Bluetooth wireless technology remains
disabled on the IP Phone 1140E after bootup:
• The TFTP Server is down or is no longer present on the network.
• Network failure.
• The DEVICE_CONFIG section is missing from the 1140e.cfg file or is
present but the specified device config file cannot be accessed, or it can
be accessed but the ENABLE_BT line is either missing, or is present but
the value of 1 is missing.
Create the DEVICE CONFIG section and file
The file pointed to by the [DEVICE CONFIG] section contains the
parameter, ENABLE_BT. The parameter's value is set to 1, which enables
Bluetooth wireless technology.
The [DEVICE_CONFIG] section can point to a single file that enables or
disables the Bluetooth wireless technology on all phones, or it can point to a
device configuration file for specific phones using a wildcard file name to
enable the Bluetooth wireless technology for select phones. The
configuration files for the specific phones use the IP Phone MAC address as
the file name with the .cfg file extension.
Definition
IP address of the TFTP server that will download
the FILENAME file.
For future use.
IP Phones Description, Installation, and Operation
Page 597 of 630