Nortel 1110 Installation And Operation Manual page 571

Appendix E: IP Phone diagnostic utilities
The Return soft key changes to Stop and the other soft keys become
blank.
The IP Phone traces the route to the address for the configured number
of server hops, displaying the hop number (starting at 0), the time in
milliseconds, and the IP address.
When the trace is complete, the screen displays the following:
Trace complete.
10 To stop Tracert before it completes, tap the Stop soft key.
The Stop soft key becomes the Return soft key when Tracert stops.
11 Tap the Return soft key to return to Local Tools menu or the Stop key
to exit the menu and return to the telephone display.
3. Ethernet Statistics
Use Procedure 117 on
Procedure 117
Using Ethernet Statistics tool
1 Press the Services key twice.
2 Press 2 3 on the dialpad to access the Ethernet Statistics menu or use
the Up/Down navigation keys to scroll and highlight the Ethernet
Statistics option.
3 Press the Select soft key.
You can press the Return soft key exit the menu to return to the Local
Diagnostics submenu.
The screen displays Reset, NIport/PCport, and Return soft keys. The
NIport/PCport soft key is used to select the Network (NI) Port or the PC
(PC) Port. The soft key label indicates the current display page. For
example, when NIport appears on the soft key label, the information
showing on the display is for the network interface port.
End of Procedure
page 571 to use the Ethernet Statistics menu.
IP Phones Description, Installation, and Operation
Page 571 of 630