Nortel 1110 Installation And Operation Manual page 390

Page 390 of 630
Keys and functions
Table 44
IP Phone 1140E keys and functions (Part 1 of 3)
Key
Hold
Goodbye
Visual Alerter/Message
waiting indicator
Feature Status Lamp
indicator
User-defined feature
keys labels
Soft keys
Fixed feature keys
Expand to PC
553-3001-368 Standard 26.00
Nortel IP Phone 1140E
Table 44 lists keys and functions for the IP Phone 1140E.
Function
Press the Hold key to put an active call on hold. Press the line (DN)
key beside the flashing LCD to return to the caller on hold.
Press the Goodbye key to terminate an active call.
When a message is waiting, the red Visual Alerter/Message waiting
indicator lights. Also, when the ringer sounds, this indicator flashes.
When the firmware is updating, the blue Feature Status Lamp
indicator flashes.
Note: This function requires server support and, therefore, is not
available on all phones.
User-defined feature key labels are configured for various features
on the IP Phones.
A steady LCD light beside a line (DN) key indicates the feature or
line is active. A flashing LCD indicates the line is on hold or the
feature is being programmed.
Soft keys are located below the display area. The LCD label above
the key changes, based on the active feature.
Note: A triangle before a key label indicates that the key is active.
Use these keys to access non-programmable standard features.
The Expand to PC key is used to access external server
applications such as External Application Server.
August 2007