Keys And Functions - Nortel 1110 Installation And Operation Manual

Nortel IP Phone 2001
Page 42 of 630

Keys and functions

Table 2
IP Phone 2001 keys and functions
Key
Speaker
Message waiting/
Incoming call indicator
Volume control bar
Navigation keys
Dial/Line key
Hold key
Soft keys (self-
labeled)
Message key
Goodbye key
553-3001-368 Standard 26.00
Table 2 describes the IP Phone 2001 keys and functions.
Function
Press the Line key to activate the speaker for on-hook dialing and
listening.
The Message waiting lamp turns ON to indicate that a message has
been left for the user. This lamp also flashes when the set ringer is
ON.
Use the volume control bar to adjust the volume of the Handset,
Ringer, and On-hook Dialing/Listen tones.
Press the right side of the rocker bar to increase volume; press the left
side to decrease volume.
Use the navigation keys to scroll through menus and lists in the
display area.
Use the Line key to access the single line and activate on-hook
dialing. No status icon or LED is provided.
Press the Hold key to put an active call on hold. Press the Dial/Line
key to return to the caller on hold.
Soft keys (self-labeled) are located below the display area. The LCD
label above the key changes, based on the active feature.
Note: A triangle before a key label indicates that the key is active.
Press the Message key to access your voicemail box.
Press the Goodbye key to terminate an active call.
August 2007