Honda Accord 2008 Manual page 698

07/11/02 09:18:37 61TA0000_110_0379
10. Remove the fuel tank protector (A).
＊０４
11. Remove the right parking brake cable mounting bolts (see page 19-41).
12. Place a jack or other support under the fuel tank (B).
13. Remove the strap bolts (C) and the straps (D).
14. Remove the fuel tank.
15. Install the parts in the reverse order of removal.
NOTE:
• New fuel tanks have a ring pull (E) at the fuel vapor hose connector (F). When you connect the hose and confirm
that the connection is secure, remove the ring pull by pulling it down.
• Before connecting the fuel fill pipe and the quick-connect fitting, check for dirt, and clean them if needed, taking
care not to damage the fuel fill pipe and other parts.
E
D
B
C
38 N·m
(3.9 kgf·m,
28 lbf·ft)
E
F
A
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
11-379