Honda NSS250S Manual page 700

Honda S Matic System (NSS250A)
REDUCTION GEAR
Check the reduction gear A and B for wear or dam-
age.
Replace them if necessary.
REDUCTION GEAR A, B BEARING INSPECTION/
REPLACEMENT
Turn the inner race of each bearing with your finger.
The bearings should turn smoothly and quietly.
Also check that the outer race of the bearing fits
tightly in the left crankcase.
Replace the bearings if the inner race do not turn
smoothly, quietly, or if the outer race fit loosely in
the left crankcase.
Replace the bearings, if necessary (page 24-56).
BEARING REPLACEMENT
GEAR A BEARING (6900UU)
REDUCTION GEAR B
24-56
maxiscooter-club.ru
REDUCTION GEAR A
GEAR B BEARING (6901UU)
REDUCTION GEAR A REDUCTION GEAR B
GEAR A BEARING (6900UU)
GEAR B BEARING (6900UU)