Honda NSS250S Manual page 391

maxiscooter-club.ru
Hold the flywheel with a special tool and remove
the starter clutch outer socket bolts.
TOOL:
Flywheel holder
Remove the sprag clutch/starter clutch outer from
the flywheel.
INSPECTION
Check the starter driven gear and reduction gear
teeth for wear or damage.
Measure the starter driven gear boss O.D.
SERVICE LIMIT: 45.615 mm (1.7959 in)
Measure the starter driven gear bushing I.D.
SERVICE LIMIT: 25.100 mm (0.9882 in)
Check the starter clutch outer and sprag clutch for
abnormal wear or damage.
Measure the starter clutch outer I.D.
SERVICE LIMIT: 62.395 mm (2.4565 in)
ALTERNATOR/STARTER CLUTCH
07725-0040001
FLYWHEEL HOLDER
FLYWHEEL
STARTER DRIVEN GEAR
CLUTCH OUTER
SOCKET BOLTS
SPRAG CLUTCH SOCKET BOLTS
REDUCTION GEAR
SPRAG CLUTCH
13-11