Honda NSS250S Manual page 23

MATERIAL
Molybdenum disulfide
paste (containing more
than 40% molybdenum
disulfide, NLGI #2 or
equivalent)
Locking agent
maxiscooter-club.ru
LOCATION
Engine mounting bushing groove
Screw gear threads (NSS250A)
Drive shaft collar groove
Crankshaft collar groove
Balancer shaft sub-gear sliding surface
Movable drive pulley dust seal lips (NSS250A)
Movable drive face spline collar teeth (NSS250A)
Right/Left crankcase socket bolt threads
Oil filter boss threads (engine side)
Cam stopper plate bolt threads
Cam sprocket bolt threads
Cylinder head sealing bolt threads
Fan motor threads
Starter clutch outer socket bolt threads
Starter driven gear guide bolt threads
Main stand hook bolt threads
GENERAL INFORMATION
REMARKS
Fill up 0.50 – 0.70 g (0.018 –
0.025 oz)
Fill up 4.0 – 5.0 g (0.14 – 0.18
oz)
Fill up 0.10 g (0.004 oz)
Fill up 2.5 – 3.5 g (0.09 – 0.12
oz)
Coating width 6.5 ± 1.0 mm
(0.26 ± 0.04 in) from the tip of
exclude 2.0 – 3.0 mm (0.08 –
0.12 in)
Coating width 6.5 ± 1.0 mm
(0.26 ± 0.04 in) from the tip of
exclude 2.0 – 3.0 mm (0.08 –
0.12 in)
Coating width 6.5 ± 1.0 mm
(0.26 ± 0.04 in) from the tip of
exclude 2.0 – 3.0 mm (0.08 –
0.12 in)
Coating width 6.5 ± 1.0 mm
(0.26 ± 0.04 in) from the tip
Coating width 4.5 ± 1.0 mm
(0.18 ± 0.04 in) from the tip of
exclude 2.0 – 3.0 mm (0.08 –
0.12 in)
Coating width 6.5 ± 1.0 mm
(0.26 ± 0.04 in) from the tip of
exclude 2.0 – 3.0 mm (0.08 –
0.12 in)
Coating width 6.5 ± 1.0 mm
(0.26 ± 0.04 in) from the tip of
exclude 2.0 – 3.0 mm (0.08 –
0.12 in)
1-19