Honda NSS250S Manual page 262

FUEL SYSTEM (PGM-FI)
Remove the O
INSTALLATION
• Do not use an impact wrench while removing or
installing the O
Install and hand tighten an O
der head.
Tighten the O
TORQUE: 25 N·m (2.5 kgf·m, 18 lbf·ft)
Connect the O
• Take care not to tilt the O
necting the cap to the O
• Do not turn the O
Connect the O
Route the wire
install it to the stay.
harness properly
(page 1-21).
Install the luggage lower box (page 3-16).
6-108
maxiscooter-club.ru
sensor from the cylinder head.
2
sensor, or it may be damaged.
2
sensor onto the cylin-
2
sensor to the specified torque.
2
sensor cap of a new O sensor cord.
2 2
sensor cap when con-
2
sensor.
2
sensor cap, after connecting it.
2
sensor 1P (Black) connector and
2
O SENSOR
2
O SENSOR
2
O SENSOR CORD
2
O SENSOR CAP
2
1P (Black) CONNECTOR
STAY