Honda NSS250S Manual page 441

ASSEMBLY
FORK PIPE
BUSHING
OIL LOCK PIECE
BOTTOM CASE
SEALING
WASHER
29.4 N·m
GUIDE BUSHING
(3.0 kgf·m, 22 lbf·ft)
Install the rebound spring to the fork piston.
Apply fork oil to the fork piston ring whole surface
When removing the
and install the fork piston to the fork pipe.
piston ring, do not
reuse it.
Install the oil lock piece to the fork piston.
Install the fork pipe into the bottom case.
• Remove the burrs from the fork pipe bushing
mating surface, being careful not to peel off the
coating.
• Be careful not to damage the slider bushing coat-
ing.
maxiscooter-club.ru
FORK PIPE
FORK OIL SEAL
BACK UP RING
FRONT WHEEL/SUSPENSION/STEERING
PISTON RING
22 N·m (2.2 kgf·m, 16 lbf·ft)
FORK
PISTON
REBOUND
SPRING
DUST SEAL
STOPPER RING
FORK PISTON
REBOUND SPRING
OIL LOCK PIECE
O-RING
FORK SPRING
PISTON RING
15-23