Honda NSS250S Manual page 383

SERVICE INFORMATION
GENERAL
• This section covers the removal and installation of the flywheel, alternator/starter clutch and crankshaft position sensor.
• These services can be done with the engine installed in the frame.
• For alternator inspection (page 19-8)
• For CKP sensor inspection:
– NSS250S: (page 20-6)
– NSS250A: (page 20-8)
SPECIFICATIONS
Starter driven Boss O.D.
gear
Bushing I.D.
Starter clutch outer I.D.
TORQUE VALUES
Flywheel bolt
Starter clutch outer socket bolt
Air cleaner housing mounting bolt
TOOLS
Flywheel holder
07725-0040001
TROUBLESHOOTING
Starter motor turns, but engine does not turn
• Faulty starter clutch
• Damage starter reduction gear
maxiscooter-club.ru
ITEM
103 N·m (10.5 kgf·m, 76 lbf·ft)
23 N·m (2.3 kgf·m, 17 lbf·ft)
11 N·m (1.1 kgf·m, 8 lbf·ft)
Flywheel puller
07933-KM10001
ALTERNATOR/STARTER CLUTCH
STANDARD
45.660 – 45.673 (1.7976 – 1.7981)
25.026 – 25.045 (0.9853 – 0.9860)
62.319 – 62.345 (2.4535 – 2.4545)
Apply oil to the threads and seating sur-
face, UBS bolt
Apply locking agent to the threads
Unit: mm (in)
SERVICE LIMIT
45.615 (1.7959)
25.100 (0.9882)
62.395 (2.4565)
13-3