Remove the screws.
Disconnect the seat/console box lock release button
4P (Black) and combination meter 28P (Gray) con-
nectors.
Remove the rear meter panel by releasing the tabs
from the grommets of the frame.
Installation is in the reverse order of removal.
Be careful not to
damage the tabs.
DISASSEMBLY/ASSEMBLY
Remove the screws A, B, speaker boxes and speaker
grills.
Remove the screws and seat/console box lock
release button.
Remove the screws and combination meter.
• For combination meter disassembly (page 22-
17).
COMBINATION METER
SPEAKER BOX
SCREW A
maxiscooter-club.ru
SCREWS
SPEAKER GRILL
SCREWS B
FRAME/BODY PANELS/EXHAUST SYSTEM
NSS250A shown:
REAR METER PANEL
TABS
GROMMETS
SPEAKER BOX
BUTTON
SCREWS
4P CONNECTOR
SCREWS
28P CONNECTOR
SPEAKER GRILL
SCREW A
SCREWS B
3-23