Honda NSS250S Manual page 637

maxiscooter-club.ru
INSPECTION (WITH TEST PROBE)
Disconnect the handle lock module 21P (Black) con-
nector (page 23-26).
Disconnect the LF antenna 2P (Natural) connector
(page 23-30).
Check the continuity between the handle lock mod-
ule 21P and LF antenna 2P connectors of the wire
side.
CONNECTION: Blue/white – Blue/white
Blue/green – Blue/green
There is continuity if the system is normal.
If there is no continuity, check for open circuit in
Blue/white and/or Blue/green wire.
Connect the handle lock module 21P (Black) connec-
tor.
Check the continuity between the LF antenna 2P
connector of the wire side and ground.
CONNECTION: Blue/white – Ground
Blue/green – Ground
There is no continuity if the system is normal.
If there is continuity, check for short circuit in Blue/
white and/or Blue/green wire.
INSPECTION (WITH TEST HARNESS)
Connect the test harness 21P between the handle
lock module 21P (Black) connectors and main har-
ness (page 23-17).
Check the continuity between the test harness 21P
and LF antenna 2P connectors of the wire side.
CONNECTION: 8 – Blue/white
9 – Blue/green
There is continuity if the system is normal.
If there is no continuity, check for open circuit in
Blue/white and/or Blue/green wire.
Honda Smart Card Key System
LF ANTENNA 2P CONNECTOR
(Wire side/female terminals)
Blue/
white
Blue/
green
HANDLE LOCK MODULE 21P CONNECTOR
(Wire side/female terminals)
LF ANTENNA 2P CONNECTOR
(Wire side/female terminals)
Blue/green
LF ANTENNA 2P CONNECTOR
(Wire side/female terminals)
(8)
Blue/white Blue/white
(9)
TEST HARNESS 21P
Blue/
white
Blue/
green
Blue/white
Blue/green
23-31