Movable Drive Face Position Sensor Shaft/Reduction Gear - Honda NSS250S Manual

Honda S Matic System (NSS250A)
Connect the ratio control motor 2P (Black) connec-
tor.
Install the luggage lower box (page 3-16).
MOVABLE DRIVE FACE POSITION
SENSOR SHAFT/REDUCTION GEAR
MOVABLE DRIVE FACE POSITION
SENSOR SHAFT REMOVAL
• When removing the movable drive face position
sensor shaft/reduction gear, perform the Honda
S Matic System initial setting procedure (page
24-61).
Remove the movable drive face position sensor
(page 24-51).
Remove the sensor plate.
Remove the O-ring and sensor shaft.
24-54
maxiscooter-club.ru
2P CONNECTOR
SENSOR PLATE
O-RING SENSOR SHAFT