Honda NSS250S Manual page 522

ABS (NSS250A)
2. Relay Power Input Line Short Circuit Inspection
Check the continuity between the ABS modula-
tor 25P connector of the wire side and ground.
TOOL:
Test probe
CONNECTION: Red/green – Ground
Is there continuity?
YES
NO
3. Failure Reproduction
Connect the ABS modulator 25P connector
(page 18-28).
Erase the problem code (page 18-9).
Test ride the scooter above 30 km/h (18 mph).
Retrieve the problem code (page 18-8).
Does the indicator blink 54 times?
YES
NO
PROBLEM CODE 61 or 62 (Power
Circuit)
1. ABS Power Input Voltage Inspection
Disconnect the ABS modulator 25P connector
(page 18-28).
Turn the ignition switch ON, engine stop switch
to " ".
Measure the voltage between the ABS modula-
tor 25P connector terminals of the wire side.
TOOL:
Test probe
CONNECTION: Black/light green (+) – Green (–)
Is there battery voltage?
YES
NO
18-22
maxiscooter-club.ru
07ZAJ-RDJA110
– Short circuit in Red/green wire
– • Open circuit in Green wire
• Intermittent failure (Replace the ABS
FSR (30 A) fuse, and recheck.)
– Faulty ABS modulator
– Fail-safe relay is normal (intermittent
failure).
07ZAJ-RDJA110
– GO TO STEP 3.
– GO TO STEP 2.
25P CONNECTOR
(Wire side/female terminals)
Red/green
25P CONNECTOR
(Wire side/female terminal)
Black/light
green
Black/light green
ABS INDICATOR
Green
Green