COOLING SYSTEM
ASSEMBLY
8.5 N·m (0.9 kgf·m, 6.3 lbf·ft)
2.7 N·m (0.3 kgf·m, 2 lbf·ft)
Apply locking agent to the fan motor threads.
Install the cooling fan to the cooling fan motor by
aligning the cut-out of the cooling fan with the cut-
out of the fan motor shaft and tighten the nut to the
specified torque.
TORQUE: 1.0 N·m (0.1 kgf·m, 0.7 lbf·ft)
Install the fan motor assembly to the shroud and
tighten the screws to the specified torque.
TORQUE: 2.7 N·m (0.3 kgf·m, 2 lbf·ft)
Route the fan motor wire to the hook of the shroud.
7-16
maxiscooter-club.ru
RADIATOR
SHROUD
FAN MOTOR
1.0 N·m (0.1 kgf·m, 0.7 lbf·ft)
COOLING FAN
NUT
COOLING FAN
SCREWS
SHROUD
FAN MOTOR ASSEMBLY
Align
WIRE BAND
HOOK