Honda NSS250S Manual page 697

Remove the bolts and stay.
Remove the ratio control motor and O-ring.
INSTALLATION
Apply oil to a new O-ring and install it to the ratio
Be sure that the
control motor groove.
motor shaft is not
contaminated.
Install the ratio control motor.
Install the stay and bolts.
Tighten the bolts.
maxiscooter-club.ru
Honda S Matic System (NSS250A)
STAY
O-RING
RATIO CONTROL MOTOR
O-RING
RATIO CONTROL MOTOR
STAY
BOLTS
BOLTS
24-53