Honda NSS250S Manual page 453

SERVICE INFORMATION
GENERAL
Frequent inhalation of brake shoe dust, regardless of material composition could be hazardous to your health.
• Avoid breathing dust particles.
• Never use an air hose or brush to clean brake assemblies. Use an OSHA-approved vacuum cleaner.
• A contaminated brake disc or pad reduces stopping power. Discard contaminated pads and clean a contaminated disc
with a high quality brake degreasing agent.
• A contaminated brake drum or shoe reduces stopping power. Discard contaminated shoes and clean a contaminated
drum with a high quality brake degreasing agent.
• When servicing the rear wheel and suspension, support the scooter securely on its center stand.
• After rear wheel installation, check the brake operation by applying the brake lever.
• Use only tires marked "TUBELESS" and tubeless valve stems on rims marked "TUBELESS TIRE APPLICATION".
• Use genuine Honda replacement bolts and nuts for all suspension pivot and mounting point.
• NSS250A: After installing the rear wheel, measure the clearance (air gap) between the sensor and pulser ring (page 18-
26).
• For ABS system service (page 18-4)
• For brake system information (page 17-4)
SPECIFICATIONS
Minimum tire tread depth
Cold tire Driver only
pressure
Driver and passenger
Wheel
Rim runout
Balance weight
Parking brake Drum I.D.
Lining thickness
TORQUE VALUES
Rear brake disc socket bolt
Swingarm mounting bolt
Rear axle nut
Shock absorber mounting bolt
Rear brake caliper mounting bolt
Parking brake arm bolt
Air cleaner housing mounting bolt
Shock absorber bracket mounting bolt
TOOLS
Driver
07749-0010000
maxiscooter-club.ru
ITEM
Radial
Axial
42 N·m (4.3 kgf·m, 31 lbf·ft)
49 N·m (5.0 kgf·m, 36 lbf·ft)
118 N·m (12.0 kgf·m, 87 lbf·ft)
39 N·m (4.0 kgf·m, 29 lbf·ft)
30 N·m (3.1 kgf·m, 22 lbf·ft)
10 N·m (1.0 kgf·m, 7 lbf·ft)
11 N·m (1.1 kgf·m, 8 lbf·ft)
30 N·m (3.1 kgf·m, 22 lbf·ft)
Attachment, 42 x 47 mm
07746-0010300
REAR WHEEL/PARKING BRAKE/SUSPENSION
STANDARD
–
2
200 kPa (2.00 kgf/cm , 29 psi)
2
225 kPa (2.25 kgf/cm , 33 psi)
–
–
–
95.0 – 95.2 (3.74 – 3.75)
2.8 – 3.0 (0.11 – 0.12)
ALOC bolt; replace with a new one
U-nut
ALOC bolt; replace with a new one
Pilot, 17 mm
07746-0040400
Unit: mm (in)
SERVICE LIMIT
2.0 (0.08)
–
–
2.0 (0.08)
2.0 (0.08)
70 g (2.5 oz)
maximum
95.5 (3.76)
2.0 (0.08)
16-3