Honda NSS250S Manual page 365

maxiscooter-club.ru
Hold the clutch outer with a special tool and tighten
the clutch outer nut to the specified torque.
TOOL:
Flywheel holder
TORQUE: 74 N·m (7.5 kgf·m, 55 lbf·ft)
Install the drive pulley face.
– NSS250S: (page 11-11)
– NSS250A: (page 11-18)
Install the left crankcase cover (page 11-9).
DRIVE PULLEY/DRIVEN PULLEY/CLUTCH
NUT
07725-0040001
FLYWHEEL HOLDER
11-37