INSTALLATION
EXTREME PRESSURE GREASE:
· BEARING
· BEARING RACE
· DUST SEAL
STEERING STEM
Apply 3 – 5 g (0.1 – 0.2 oz) of specified grease (page
1-20) to the lower bearing and both side of the lower
bearing race.
Install the lower bearing onto the stem.
Insert the steering stem into the head pipe.
Apply 3 – 5 (0.1 – 0.2 oz) of specified grease (page 1-
20) to the upper bearing and both side of the upper
bearing race.
Install the upper bearing, upper bearing inner race
and dust seal onto the stem.
maxiscooter-club.ru
FRONT WHEEL/SUSPENSION/STEERING
LOWER OUTER RACE
LOWER BEARING
LOWER INNER RACE
LOWER DUST SEAL
DUST SEAL
UPPER INNER RACE
LOCK NUT
LOCK WASHER
STEERING STEM
ADJUSTING NUT
UPPER DUST SEAL
UPPER INNER RACE
UPPER BALL BEARING
UPPER OUTER RACE
LOWER BALL BEARING
STEERING STEM
UPPER BEARING
15-29