Honda NSS250S Manual page 432

FRONT WHEEL/SUSPENSION/STEERING
Remove the left axle holder bolt.
Remove the front axle and front wheel.
Do not operate the
brake lever after
removing the front
NSS250A: Be careful not to damage the front wheel
wheel.
speed sensor.
Remove the side collars.
INSPECTION
AXLE
Place the axle in V-blocks and measure the runout.
Actual runout is 1/2 the total indicator reading.
SERVICE LIMIT: 0.2 mm (0.01 in)
WHEEL
Check the rim runout by placing the wheel in a
truing stand.
Spin the wheel slowly and read the runout using a
dial indicator.
Actual runout is 1/2 the total indicator reading.
SERVICE LIMITS:
Radial: 2.0 mm (0.08 in)
Axial:
15-14
maxiscooter-club.ru
2.0 mm (0.08 in)
FRONT AXLE
AXLE HOLDER BOLT
NSS250A shown:
SIDE COLLARS
NSS250A shown: